Factory Default Settings - NETGEAR CG834WG User Manual

Wireless Cable Modem Gateway CG834WG User Manual
Operating Frequency Ranges:
Encryption:

Factory Default Settings

You can use the reset button located on the rear panel of your gateway to reset all settings to their
factory defaults. This is called a hard reset. To perform a hard reset, push and hold the reset button
for 5 seconds. The gateway will reboot and return to the settings shown in the following table.
Table A-1. Default Configuration Settings
Feature
Gateway Login
User login URL
User name (case sensitive)
Login Password (case sensitive)
Local Network (LAN)
LAN IP
Subnet mask
RIP direction
RIP version
RIP authentication
DHCP server
DHCP starting IP address
DHCP Ending IP Address
DMZ
Time zone
Time Zone Adjusted for Daylight Saving
Time
SNMP
A-2
2.412~2.462 GHz (US)
2.412~2.472 GHz (Japan)
2.412~2.472 GHz (Europe ETSI)
40-bit (also called 64-bit), 128-bit WEP data encryption,
WPA-PSK(TKIP), and WPA2-PSK(AES)
Default Behavior
http://192.168.0.1
admin
superuser
password
192.168.0.1
255.255.255.0
None
Disabled
None
Enabled
192.168.0.10
192.168.0.19
Disabled
GMT
Disabled
Disabled
v1.0, October 2007