Program Play; Autoplay; Introscan - RCA DRC233N User Manual

Program Play (Audio CDs)
With this option, you choose the order in which the tracks play.
1.
Highlight Program Play, and press the OK button (the Program Playlist screen appears). Follow
the on-screen instructions to create your program:
1a.
Audio CD: select a track using the
the tracks.
1b. mp3 or WMA CD: select a folder using the
button to access the list of files, then select a file using the
2.
Press OK to add the track (audio CD) or file (mp3 or WMA) selected, to the list. Press the
CLEAR button to remove the last track/file from the list. Press PLAY to start program play.
Repeat steps 1 and 2 as often as necessary.
3.
You can play your program by highlighting
the program to play later by highlighting

AutoPlay

You can set up the DVD Player so a disc automatically starts playing whenever the disc tray is closed.
Highlight AutoPlay and press OK (On appears next to the AutoPlay menu).To turn AutoPlay off, just
press OK again while AutoPlay is highlighted.
Note: AutoPlay isn't available for mp3 or WMA discs (if you have selected AutoPlay On, the disc's contents will
appear automatically when you insert the disc).
Introscan (Audio CDs, mp3,WMA)
This option enables you to preview the first few seconds of each track on a CD.
After you've highlighted the Introscan menu, press OK (the first few seconds of each track start
playing); press STOP to stop Introscan or PLAY to continue playing the current track.
Note: Introscan is also available while you're playing a CD via the Info Display (page 18).
Graphics throughout this User's Guide are for representation only. Graphics throughout this User's Guide are for representation only.
and buttons, or select All to start playing all
and buttons, then press the
Play
and pressing the OK button, or you can save
Done
and pressing OK.
25 25
Menu System
and buttons.