Connection: Dvd + Tv + Vcr - RCA DRC220N User Manual

1590940A 3/7/02 9:21 AM
Chapter 1: Setup and Connections
Back of TV (example)
AUDIO
VIDEO
L R
- OR -
2a
AUDIO
OUT
Y
VIDEO
R
S-VIDEO
OUT
Pb
1
L
Pr
VIDEO OUT
Back of DVD Player
AUDIO
VIDEO
L R
Back of VCR (example)
The back of your TV and VCR might look different than
the ones pictured here.
Details about the different kinds of cables used to connect
your DVD player are on page 56.
Note: Don't connect the DVD player to the VCR, or
through the VCR. Doing so could negatively affect the
picture quality and/or disable the DVD player.
4
Page 4

Connection: DVD + TV + VCR

1. Connect the audio cables to the AUDIO OUT L (left – white) and R (right
S-VIDEO 4
CABLE/ANTENNA
2b
2. Connect the video cable.
DIGITAL AUDIO OUT
OPTICAL COAXIAL
4
OUT TO TV
CABLE
OR
OFF-AIR SIGNAL
IN FROM ANTENNA
3
3. Connect the antenna or cable to the Antenna Input jack on the VCR
4. Connect a coaxial cable to the Antenna Output jack on the VCR (OUT
5. Insert the AC power cord into an AC outlet.
– red) jacks on the back of your DVD Player, and to the corresponding
Audio Input jacks on your TV (sometimes labeled AUDIO IN L and R).
A. Basic video connection – Connect the video cable (yellow) to the
VIDEO OUT jack on the back of your DVD Player, and to the Video
Input jack on your TV (sometimes labeled VIDEO IN).
– OR –
B. S-Video (optional) – If your TV has an S-Video jack, connect the
S-Video cable (not provided) to an S-VIDEO OUT jack on the back of
your DVD Player and to the S-VIDEO jack on your TV.
Note: If your TV has component video (Y, Pb, Pr) jacks, use video-grade cables (not
provided) to connect the TV to the DVD player (Y to Y, Pb to Pb, etc.). It is essential to
match the color coded connectors with a compatible TV.
(sometimes labeled IN FROM ANTENNA).
TO TV) and to the Antenna Input jack (CABLE/ANTENNA) on the TV.
Go to page 8