Dial Cycles
The RINSE & HOLD cycle is for rinsing
partial loads which will be washed later.
Do not use detergent.
a. Make sure ENERGY SAVER is selected.
b. Be sure the door is unlatched.
c. Slowly turn the Cycle Indicator Dial to
RINSE & HOLD.
d. Latch the door to start the cycle.
Cycle Selection Chart
Water Use
Gallons
Wash Cycles
(approx.)
POTS & PANS
10.2
NORMAL WASH
8.6
WATER SAVER
7.0
RINSE & HOLD
4.2
Drying Options:
HEATED DRY. Available on all wash cycles except RINSE & HOLD.
ENERGY SAVER. Drying heater is turned off. Dishes dry naturally.
PLATE
WARMER
(HEATED DRY ON)
Wash Cycle
Time
Minutes
(approx.)
62*
Rinse
Rinse
62*
Rinse
62*
12*
OFF
ON
RINSE & HOLD
(HEATED DRY OFF)
The PLATE WARMER cycle is for warming
clean dishes and serving plates for the serving
of hot foods. The cycle will take approximately
32 minutes if selected.
a. Load clean plates and dishes to be warmed.
b. Select HEATED DRY.
c. Be sure the door is unlatched.
d. Slowly turn the Cycle Indicator Dial to
PLATE WARMER.
e. Latch the door to start the cycle.
Cycle Sequence
Main
Rinse
Rinse
Rinse
Wash
Main
Rinse
Rinse
Rinse
Wash
Main
Rinse
Rinse
Rinse
Wash
Rinse
Rinse
Rinse
Rinse
Rinse
Rinse
5
Need help?
Do you have a question about the PSD430 and is the answer not in the manual?