Assembly instructions
Step 1
a. Insert the Guide rods (3) into the holes on the Rear stabilizer (2). Fix using 2 x M10 x 25mm Allen
bolts (47) and 2 x 10mm Washers (64).
b. Slide 2 x Ø61mm Rubber bumpers (85) down onto Guide rods (3).
c. Attach the Base frame (1) to the Rear stabilizer (2). Fix using 2 x M10x 85mm Carriage bolts (53), the
Rear bracket (27),2 x 10mm Washers (64) and 2 x M10 Aircraft nuts (63).
Note: (62/78) were fixed in the factory.
8