Placing Channels In Memory/Autoprogram; Using Advanced Features Placing Channels In Memory/Autoprogram - RCA M20303BL User Manual

Using Advanced Features
Placing Channels in Memory (Autoprogramming)
Only channels 2–13 appear in the TV's memory when you first turn it on.
The channels available in your area must be programmed into the TV's
memory when you hook up your TV. Using CHANNEL up or down
allows you to scan through these channels.
You may want to add or delete a few channels if some stations have weak
signals or were off the air when the TV was programmed. Refer to the Add
or Delete Channels section below.
1.
Place channels in
memory (Autoprogram)
2.
Add or delete channels
Controls Alarm Adjust Setup
English Français Español
Autoprogram
Label: 00
Channel Memory: 13 Stored
Cable/Air: Cable
Controls Alarm Adjust Setup
English Français Español
Autoprogramming
Label: 00
Channel Memory: 15 Stored
Cable/Air: Cable
Controls Alarm Adjust Setup
English Français Español
Autoprogram
Label: 00
Channel Memory: 13 Stored
Cable/Air: Cable
Controls Alarm Adjust Setup
English Français Español
Autoprogram
Label:l 00
Channel Memory: 13 Erased
Cable/Air: Cable
A. Hook up an antenna, cable or
13
components before you begin
these steps or you will not be
able to add channels into
memory.
B. Press MENU repeatedly to
select the Setup Menu. This
Clear
menu is white.
C. Press CHANNEL down to
highlight Autoprogram.
15
+
D. Press
all active channels into
memory.
E. Wait until the TV has cycled
through all the channels and
returns to the original channel.
Clear
F. Press CLEAR to remove the
menu from the screen when
you are finished.
13
A. Press MENU repeatedly to
select the Setup menu.
B. Press CHANNEL down to
highlight Channel Memory.
+
C. Press
channel number.
Clear
D. Select the channel number you
want to add or delete with the
number buttons.
+
E. Press
13
channel (you will see Stored on
the screen when added and
Erased when deleted).
F. Repeat D and E for more
channels.
Clear
G. Press CLEAR to remove the
menu from the screen when
you are finished.
to start the TV adding
to underline the
to add or delete a
9