Using Advanced Features; Placing Channels In Memory/Autoprogram; Using Advanced Features Placing Channels In Memory/Autoprogram - RCA F27632 User Manual

Using Advanced Features
Placing Channels in Memory (Autoprogramming)
Only channels 2-13 appear in the TV's memory when you first turn it on.
The channels available in your area must be programmed into the TV's
memory when you hook up your TV. Using (up or down) allows you to
scan through these channels.
Place channels in
memory (AutoProgram)
Controls Alarm
13
A. Hook up an antenna, cable or
components before you begin
these steps or you will not be
able to add channels into
memory.
B. Press MENU.PROG repeatedly
to select the Setup Menu and
highlight Autoprogram. This
menu is white.
C. Press MOVE • to start the TV
adding all active channels into
memory.
D. Wait until the TV has cyded
through all the channels and
returns to the original channel.
19