MTX RNGRPOD65 Owner's Manual page 6

Step 10 - Reconnect the speaker to the speaker wires and mount the speaker to the pod using a T15
Torx driver and the screws removed in Step 4.
Note: These screws use the threaded brass inserts and not the pre-drilled holes
Step 11 - Install the speaker grills using a the supplied Phillips head screws and a Phillips
screwdriver or screw gun
Step 12 - Once secure, make your speaker wire connections and reassemble the top dash panel
securing it in place with the hardware removed in previously.
6
M T X . C O M