Clonepro™ Remote Buttons - RCA J27F636 User Manual

Using the Remote Control
ClonePRO™ Remote Buttons
The ClonePRO can be used as a master remote. First, press ON to turn the remote on. Some of the buttons only apply when using the
ClonePRO to download or upload information to or from a TV. Those buttons are described in Chapter 5.
Note: After 30 seconds of inactivity the remote will turn itself off.
RESET Returns the picture to the original
settings and displays the Picture Presets
choice list.
Arrow buttons (up, down, left,
right) Use to move through the
on-screen menus. When a menu isn't
displayed, the up and down arrows
scan the channel list. The left and right
arrows decrease or increase the TV's
volume, unless Volume Hold is enabled.
Chapter 1 has more information on
Volume Hold.
MENU Displays the master main
menu.
20
INFO Displays channel information.
OK Press to select a menu item that is
highlighted.
CLEAR Removes any menu or display
from the screen and returns you to TV
viewing.
Chapter 2