Safety Notice For The User - Weber SOR-3 Operator's Manual

User's Manual
This description contains the required information about the intended usage of the products described
herein. It is intended for use by technically qualified personnel.
Qualified personnel are those persons who, due to their training, experience and instruction, as well as
their knowledge of the relevant standards, requirements, accident prevention regulations and operational
conditions, are authorized by those responsible for the safety of the system to carry out their respective
duties, and to recognize possible dangers and prevent them (Definition for experts according to IEC 364).
Danger Notices
The following notices serve to protect the personal safety of the operators and the safety of the described
products as well as the devices connected to them.
Warning!
Dangerous Voltage.
!
Inattention can lead to death, serious injuries or damage to equipment.
• Turn off the supply power before assembly or disassembly work and when fuses are changed or
equipment modifications are undertaken.
• Observe the applicable accident prevention and safety regulations for the respective application.
• Before placing the equipment in operation, check whether the rated voltage of the device is in agree-
ment with the supply voltage.
• Emergency OFF equipment must remain effective in all operating modes. Unlocking the emergency
OFF equipment must not cause an uncontrolled startup of equipment.
• The electrical connections must be covered!
• Ground lead connections must be inspected after mounting to insure that they function per-
fectly!
Usage According to the Regulations
The devices described herein are electrical operational equipment for application in industrial systems.
They are constructed for the regulation of oscillating conveyor equipment.
SOR 3

Safety Notice for the User

1