Adjustment; User Adjustment, Conveyor Capacity; Adaptation To The Conveyor - Weber SOR-3 Operator's Manual

User's Manual

10.0 Adjustment

Depressing the programmer key "P" initializes each type of setup.
P
1. Depress "P key".
2. With arrow keys, scroll to desired code number.
3. Depress "P Key". The first menu point will appear. If necessary, search further for the desired menu
point with the "P key" (scrolling).
4. With arrow keys, make the selection on the selected menu point.
5. Scroll with the "P key" to the next menu point, or scroll to the end of the menu, until the rated-value
again appears on the display.
6. The menu can also be directly exited, and return to the normal operation is achieved, by depressing
the "P key" longer (5 sec.).

10.1 User Adjustment, Conveyor Capacity

Code 000
P P
P

10.2 Adaptation to the Conveyor

Code 406
P
F
SOR 3
P
P
P
P
P
P
P
P
P
Oscillation amplitude (conveyer capacity) [%]
Return to the operating mode
Oscillation amplitude (conveyer capacity) [%]
P
Vibrating frequency [Hz]
P
Soft start ramp time 0...10 Sec.
P
Soft stop ramp time 0...10 Sec.
P
0 = Enable
P
I = Invert Enable
Operating mode
P
7