Table of Contents
Advertisement
Troubleshooting
4-2-10 White Spot
Is it regular
interval of 94mm?
Obstacles stuck on OPC's
surface
-> Clean the OPC and
machine or replace
developer.
When putting in/out the
developer, scratch is made.
-> Replace the developer.
4-2-11 Trembling at the End When OHP Printing
Recommended
OHP film used?
YES
Inserted over
than 10 films into
the MPF?
YES
When multi-page OHP printng,
less than 10 films are
guranteed. (Reduce the
number of films and re-insert
after Paper check LED is off)
4-10
NO
YES
D/R in developing unit has
the defect.
-> Replace the developer.
NO
NO
Other parts are touching the
fan and prevents it from
revolution.
-> Check and repair.
Transfer
NO
voltage is normal?
YES
Use the recommended film.
When OHP
printing, does the fan
temporarily stops
and revolves?
YES
Too high voltage supplied
due to the setting error of
transfer voltage.
-> Adjust/replace HVPS.
NO
Use the recommended film.
Samsung Electronics
Advertisement
Table of Contents
