Table of Contents
Advertisement
3-10 Motor
1. Before you remove the motor, you should
remove:
-All covers (see pages 3-2, 3-3,3-4)
-Gear bracket (see page 3-6)
2. Remove three screws, then remove the motor.
3-11 HVPS Board
1. Before you remove the HVPS board, you should
remove:
-All covers (see pages 3-2, 3-3,3-4)
2. Remove four screws from the HVPS board.
HVPS board
Samsung Electronics
Motor
3. Unplug the connector from the HVPS board,
then remove the board.
High voltage electrodes
Note: When you reassemble the HVPS board,
make sure that the high voltage electrodes
are placed correctly.
Disassembly and Reassembly
Gear
bracket
3-7
Advertisement
Table of Contents
