Cactus V6 IIs User Manual page 24

24
9.6
Setting
and
Selecting
the Group
2. The selected channel number will be
displayed on the LCD display.
Use the wireless sensitivity indicator on
the RX LCD display to check the strength of
the wireless signal from the TX in the
selected channel. The wireless sensitivity
ranges from excellent
Change your V6 IIs to another channel when
the sensitivity is poor.
To protect your setup from interference
from other Cactus devices, assign all your
V6 IIs to a specif ic radio ID. Press
turn the selection dial to <RADIO SETUP>.
Press and turn the selection dial to
<RADIO ID>. You may then set up a 4-digit
key by turning the dial and pressing
each digit.
The group function in the V6 IIs can assign
RXs into Group A, B, C, or D, and allows you
to poor .
and
for