Sending a Data or Fax Call
Use this procedure to send data or a fax from a connected
computer or hand-held device using a CSD or GPRS
network connection.
1 Make sure that the phone is connected and
2 Open the application (such as dial-up-networking
3 When the transfer is complete, end the call from
Receiving a Data or Fax Call
Use this procedure to transfer data or a fax to a connected
computer or hand-held device.
Transferring the Data or Fax
Your phone notifies you when the data or fax call arrives,
and transfers the call to the connected device. Use the
application running on the device to answer the call.
138
Action
powered on
or fax) on your computer, and place the call
through the application
Note: You cannot dial data or fax numbers
through your phone's keypad. You must dial
them through your computer, unless you are
making a talk then fax call (see following
section).
the connected device to close the connection