Injecting A Dose - Lilly HumaPen Savvio User Manual

Disposable insulin delivery device
Table of Contents

Advertisement

V. Injecting a Dose
Always use a new needle for each injection.
Storing the Pen with the needle attached may
allow insulin to leak from the Pen and air
bubbles to form in the cartridge.
• Caution: Do not attempt to change the dose after
you begin to push in the injection button. Failure to
follow these instructions carefully may result in
getting too much or too little insulin.
The effort needed to push in the injection button
may increase while you are injecting your insulin
dose. If you cannot completely push in the injection
button, refer to the "Questions and Answers"
section, Question 7, at the end of this manual.
• Do not inject a dose unless the pen is primed,
just before injection, or you may get too much
or too little insulin.
• If you have set (dialed) a dose and pushed in the
injection button without a needle attached or if no
insulin comes out of the needle, see the "Questions
and Answers" section, Questions 1 and 2.
1. Wash hands. Prepare the skin and use the
injection technique recommended by your Health
Care Professional.
16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents