Tv/Vcr Connection - RCA E13344 User Manual

GETTING STARTED
CABLE, CABLE BOX, OR ANTENNA
VCR 1
OUT
VIDEO AUDIO
TV
CABLE/
ANTENNA
VIDEO
CABLE, CABLE BOX, OR ANTENNA
VCR 1
OUT
VIDEO AUDIO
TV
CABLE/
ANTENNA
VIDEO
TIP
Your TV is equipped with an audio/video input. To tune to the audio/video input, press
"0, then 0" (zero button twice) on the remote. The audio/video input can also be added
to the channel scan list and accessed by the channel up and down buttons.
4
IN FROM ANT
CH3
CH4
OUT TO TV
AUDIO
OR
IN FROM ANT
CH3
CH4
OUT TO TV
AUDIO

TV/VCR Connection

The basic connection (TV and VCR), right,
is the most common connection and
is therefore used to illustrate a single
component connection with your TV.
Cables
You will use either of the following type
of cable to make your connection:
Coaxial Cables: Carries
the signal from the
antenna or cable directly
to the television or
through a cable box, as
needed by your cable
system.
Video (yellow)
Right Audio (red)
Audio/Video Cables:
Carries audio and video
Left Audio (white)
from a component to
the TV.
Video (yellow)
Right Audio (red)
How to View the VCR
Left Audio (white)
To watch the VCR with the connection
using the CABLE/ANTENNA jack, tune
the TV to Channel 3 or 4. To watch
the VCR with the connection using the
AUDIO/VIDEO in jacks, tune the TV to the
Video Input (press 0, 0 on the remote).