Connection: Tv + Vcr - RCA F27669 User Manual

Connections & Setup

Connection: TV + VCR

1. Connect your TV to your VCR
2. Connect cable or antenna to your VCR
3. Connect the G-LINK cable to the TV
8
TV (back panel)
G-LINK
3
1C
VCR
VIDEO
OUT
R
IN
R
You need to connect your VCR to your TV
with audio/video cables in order for Picture-
In-Picture (PIP) to work (see picture above).
A. Connect a coaxial cable to the CABLE/ANTENNA jack on your TV and to the Output Jack on
your VCR (sometimes labeled OUT TO TV).
B. Connect the audio/video cables. Connect audio cables (white and red) to the AUDIO IN jacks
on the back of the TV (R and L/MONO) and to the Audio Output Jacks on the VCR (sometimes
labeled OUT R L).
C. Connect the video cable (yellow) to the VIDEO IN jack on the back of the TV and to the Video
Output Jack on the VCR.
Connect the coaxial cable from your cable outlet, cable box, or antenna to the Input Jack on your
VCR (sometimes labeled IN FROM ANTENNA or IN FROM ANT).
A. If you haven't already done so, remove the Demo Pin from the G-LINK jack.
B. Connect the G-LINK cable to the G-LINK jack on the TV. Next step, place one of the wands of
the G-LINK cable to work with your VCR (instructions are on p. 13).
AUDIO
VIDEO
L / MONO
R
IN
R
L
OUT
S-VIDEO
1B
AUDIO
IN FROM ANT
L
OUT TO TV
L
CABLE/
ANTENNA
1A
CH3
CH4
2
Go to page 13
Chapter 1