Getting Started; Setup And Connection - RCA E13344 User Manual

GETTING STARTED

Setup and Connection

ANTENNA, CABLE, CABLE BOX OR VCR
CABLE/
ANTENNA
VIDEO
TV (Back Panel)
2
AUDIO
Step 1: Connect Your TV
Connect the cable from your cable
system or off-air antenna to the CABLE/
ANTENNA jack of the TV, as shown. Also
connect external devices such as a VCR or
DVD player to the video and audio jacks.
Step 2: Plug In Your TV
Plug the end of the power cord into the
wall outlet, matching the wide blade of
the plug with the wide slot in the outlet.
Be sure to insert the plug completely.
Step 3: Put Batteries in the Remote
Control
1. Remove the battery compartment
cover from the back of the
remote.
2. Insert batteries as shown,
matching the + and – ends of each
battery in the compartment.
3. Replace the cover.
Step 4: Turn on the TV
Press the POWER button on the remote
or front panel.
Step 5: Auto Channel Search
Perform an Auto Channel Search
(described in the Channel menu section).
This will program all active channels into
the TV's channel scan list.