Tv/Vcr Connection - RCA E13341 User Manual

GETTING STARTED

TV/VCR Connection

The basic connection (TV and VCR), right, is the most common
connection and is therefore used to illustrate a single component
connection with your TV.
Cables
You will use either of the following type of cable to make your
connection:
Coaxial Cables: Carries the signal from the
antenna or cable directly to the television or
through a cable box, as needed by your cable
system.
Audio/Video Cables: Carries audio and video from a
component to the TV.
How to View the VCR
To watch the VCR with the connection using the CABLE/ANTENNA jack,
tune the TV to Channel 3 or 4. To watch the VCR with the connection
using the AUDIO/VIDEO in jacks, tune the TV to the Video Input (press
INPUT on the remote).
CABLE, CABLE BOX, OR ANTENNA CABLE, CABLE BOX, OR ANTENNA
VCR 1
OUT
VIDEO
AUDIO
TV
CABLE/
ANTENNA
VIDEO
AUDIO
OR
CABLE, CABLE BOX, OR ANTENNA
VCR 1
OUT
AUDIO
VIDEO
TV
CABLE/
ANTENNA
VIDEO AUDIO
TIP
Your TV is equipped with an audio/
video input. To tune to the audio/
video input, press the INPUT button
on the remote. The audio/video
input can also be added to the
channel scan list and accessed by
the channel up and down buttons.
IN FROM ANT
CH3
CH4
OUT TO TV
IN FROM ANT
CH3
CH4
OUT TO TV
3