Operation - Redback 106485 Operation Manual

2
1
Figure 4
Figure 5
Figure 6
Figure 7

Operation

Powering the Blower
To switch the blower on, press the START button (see Figure 4).
The blower will start at the minimum air speed. To increase the air
speed, press the increase speed button repeatedly until the desired
power level is reached (see Figure 5). There are 4 air speed levels:
minimum speed, middle speed, high speed and maximum speed/
Turbo. The speed setting is displayed on the LED indicator.
Note: When operating at maximum speed the Turbo red LED light is
activated. The blower unit automatically switches to one step down
after 30 seconds to save battery capacity (see Figure 6).
To reduce the speed, press the decrease speed button repeatedly
until the desired air speed is reached (see Figure 7). The speed
setting is displayed on the status LED.
To stop the blower, press the stop button.
9