Extreme Hoops operation manual Thank you for purchasing Extreme Hoops from UNIVERSAL SPACE. We hope you enjoy the product. This manual contains valuable information about how to operate and maintain your game machine properly and safely. It is intended for the owner and/or personnel in charge of product operation.
Page 4
Extreme Hoops operation manual This product is an indoor game machine. Do not install outdoors. Avoid installing in the following places to prevent fire, electric shock, injury and/or machine malfunctioning: Places subject to rain/moisture, or places subject to high humidity.
Extreme Hoops operation manual 2. PACKAGE CONTENTS 2.1 Open the package and make sure all the items are included: 1 x Body Assembly Following accessories Part No. Name Illustration Body E-101-001-000 assembly Control panel E101-002-000 assembly Ball gate...
Page 7
Extreme Hoops operation manual 2.2 Accessories Part No. Name Specification Illustration Note 15A/220V E-101-401-000 Power cord 3.5m 5A/250 (10A/125V) Fuse E-101-402-000 φ5-20 E-101-701-000 Operation manual English E-101-403-000 E-101 -404-000 2222 E-101-405-000 Bearing with shaft 6002Z GB/T894.2-1 E-101-406-000 Cir-clip 986/d E-101-407-000...
Extreme Hoops operation manual Install the beam and bracket 1 Install the beam and bracket 2 Open the front bracket Install the control panel fix board...
Extreme Hoops operation manual Screw Screw Install the ball gate assembly Install the playfield Screw Screw Screw Screw...
Page 13
Extreme Hoops operation manual Install the header assembly Screws in the back Install the front panel Fix the control panel...
Page 14
Extreme Hoops operation manual 3.2 Control Pane Layout Link wire “Link2” exit High voltage exit Link wire “Link1” exit Low voltage exit Power cord exit Low voltage High voltage wires go wires go through this through this hole hole link1...
Extreme Hoops operation manual 3.3 Linking Games There are two buttons on the control panel: Link Game button:Press this button to compete with others. Single Player:Press this button for single player game. Linked game Schematics: Link1 Link1 Link2 Link2 How to link games: Connect Link 2 (in Game①) to Link 1 (in Game②).
Page 16
Extreme Hoops operation manual Notice: When linking the game, there should be one machine set as Game #1. Any of the machines can be set as Game #1. The rest of the machines can be #2 to #30 but the numbers cannot repeat.
Extreme Hoops operation manual 4. SET UP & INSTALLATION This product is an indoor game machine. Do not install outdoors. Refer to IMPORTANT SAFETY INSTRUCTIONS (Pg. 3) for places to avoid Place the unit on a dry level surface ...
Page 18
Extreme Hoops operation manual 4.2. Level Adjustment Install this machine on a flat surface. Adjust levers to lift casters off the ground to level the game If the game is installed on an unsuitable floor, it could cause a malfunction.
Page 19
Extreme Hoops operation manual 4.4 Connecting Power WARNING: Check the voltage rating before you connect the equipment to an electrical outlet to ensure that the required voltage and frequency match the available power source. Please refer the label of the machine.
Extreme Hoops operation manual 5. DISASSEMBLY If you need to move the game in short distance, adjust the levelers back to an “up” position so the casters touch the ground. If you need to move the game in long distance, it is highly suggested that you disassemble the game before transporting, and reassemble later.
Extreme Hoops operation manual Step 5: Separate the control panel in the front. Step 6: The package should be the same as the factory original packing. 6. HOW TO PLAY Insert coin(s). Press “single player” button or “link game” button to start the game.
Page 22
Extreme Hoops operation manual 7.2 Main Board Connection RESET button TEST button Test: Press “test” to enter this mode, go into 0, press “test” after 1 second to go to 1. (Same goes for others). TEST Content Explanation Jackpot Led_J33 2-1 flash and display “-0” to Test 0. The rest will display LED...
Page 23
Extreme Hoops operation manual 7.3 Signal Detections Sensor detection board Sensor light: To detect if the rim is in the center or not. If the sensor detects the rim, it will light up. The rim is out of position of the sensor.
Page 24
Extreme Hoops operation manual Relay board: Ticket drive board: 7.4 DIP Setting (Default setting) 2 3 4 5 1 2 3 4 5 1 2 3 4 5 Notice The above technical instructions might change without notice. Parameter settings of the I/O chart are subject to the game only.
Extreme Hoops operation manual 8. PARAMETER SETTINGS (1) Coin per game: SW1-1 and SW1-2 are the switches to adjust how many coins to start the game. There are 4 options. DIP SW1 Item Content Note Free play 1 coin for one game...
Page 26
Extreme Hoops operation manual (6) Game time SW2-3~ SW2-4 are the switches to adjust the play time for each round. There are 4 options. DIP SW2 Item Content Note Select project A Select project B Game time Select project C...
Page 27
Extreme Hoops operation manual (11) 3 Point time SW3-5 is the switch to adjust the time during 3-point shooting, There are 2 options. DIP SW1 Item Content Note 3 Point Select project A time Select project B (12) Win JP ticket SW3-6~SW3-7 are the switches to adjust tickets on JP.
Page 28
Extreme Hoops operation manual DIP SW Item Content Main NO 1 NO 2 NO 3 NO 4 NO 5 NO 6 NO 7 NO 8 NO 9 NO 10 NO 11 NO 12 NO 13 Game No. NO 14 NO 15...
Extreme Hoops operation manual 9 GAME INSTALLATION AND SERVICE 9.1 Installation 1 Firstly check the assembling instructions and assemble the game. 2 Secondly, adjust the leveler of the game on even ground. 3 After installation, plug in. check the game operation. If there is a problem, stop the game and please check the trouble shooting section of this manual.
Extreme Hoops operation manual 10. TROUBLE SHOOTINGS Problem Possible Cause Solution 1. Out of tickets. 1. Refill tickets, press reset button 2. Tickets jammed No ticket 2. Unjam the tickets and then press dispensed the reset button 3. Poor connection on the ticket dispenser 3.
Extreme Hoops operation manual Part No. Name Material Spec. Qty. E-101-431-000 Guide Q235 d 1.5 White Cross recessed pan head E-101-432-000 Q235 M4x10 color zinc screw kit E-101-600-000 Cover Clear PVC Cross recess pan head E-101-433-000 Q235 M8x45 color zinc...
Page 33
Extreme Hoops operation manual 11.2 Main Part 2...
Page 34
Extreme Hoops operation manual Part No. Name Material Spec. Qty. E-101-107-000 Beam bracket2 Q235 d 1.5 White E-101-108-000 Beam bracket Q235 d 1.5 White E-101-504-000 LED fix board Q235 d 1.5 White Hexagon flat head M6× 45 Nickel E-101-441-000 Q235...
Need help?
Do you have a question about the Extreme Hoops and is the answer not in the manual?
Questions and answers