KitchenAid KUIS155H Technical Education page 37

15. Remove the hex-head screw from the
water recirculation pump shield and re-
move the shield.
16. Remove the water fill tube from the notch
in the water recirculation pump bracket,
and pull the free end of the water line up,
out of the unit.
Water Recirculation Pump Shield
Water Fill Tube
Refer to the photos at the top of the next
column.
17. Pull out on the left and right water distribu-
tor retainers and remove the tabs from the
slots in the evaporator, disconnect it from
the hose, and remove it.
18. Remove the four screws from the evapo-
rator, then carefully lift the evaporator just
high enough to remove the two right spac-
ers.
Screw
Retainer
Water Distributor
Hose
2 Screws
19. Remove the Permagum from the liner
channel.
Remove Permagum
Continued on the next page.
4-13
Tab
Evaporator
2 Screws & Spacers