KitchenAid KUIS155H Technical Education page 16

After ensuring that the drain system is ad-
equate, use the following steps to properly
place the ice maker:
1. Plug in the ice maker or reconnect power.
2. Recheck the ice maker and make sure
that it is level.
3. Push the ice maker into position so that
the drain tube is positioned over the PVC
drain reducer.
4. If it is required by the local sanitation code,
seal the cabinet to the floor with an ap-
proved caulking compound after all water
and electrical connections have been
made.
Drain Pump System (On Some Models)
Connect the drain pump hose (provided with
the product) to the drain in accordance with all
state and local codes and ordinances.
NOTE: If the drain hose becomes twisted and
water cannot drain, the ice maker will not oper-
ate.
2-4