Add Equipment To The Armstsl - StarTech.com ARMSTSL Manual

Add equipment to the ARMSTSL

Warning! If you use a monitor arm with the ARMSTSL, make sure that you don't
position the monitors beyond the edge of the desk surface. If you extend the monitors
past the desk surface, you could create a tipping hazard. Make sure that you lower the
ARMSTSL to its lowest position before you add equipment to it, distribute the weight
across the ARMSTSL evenly, and don't extend the monitors beyond the edge of the
adjustable desk surface.
1. Move the ARMSTSL to the lowest position.
2. Place your equipment (for example, monitors, keyboard, mouse, and so on) onto the
workstation. (figure 2)
Warning! Do not exceed the weight capacity of the ARMSTSL. The larger work surface
can support up to 28 lb. (12.7 kg) and the keyboard tray can support up to 5 lb.
(2.3 kg).
figure 2
3. Make sure that your equipment is stable on the workstation before you move the
ARMSTSL.
4. Raise the ARMSTSL a short distance. If you can't easily move the ARMSTSL upwards
or it begins to move downwards when you squeeze the paddle, you need to adjust
the tension. For more information about how to do this, see the "Adjust the tension
of the ARMSTSL" section of the manual.
Instruction manual
4
0 to 28 lb.
0 to 5 lb.