Si281312E
11.Procedure to Remove Heat Exchanger
Temperature Thermistor
Procedure
Step
According to the
procedure for the removal
of decoration panel,
remove the decoration
panel.
According to the
procedure for the removal
of bell mouth and drain
pan, remove the mouth
and drain pan.
1
Cut the cable tie.
2
Pull to remove the heat
exchanger thermistor
together with heat
insulation in the
direction shown by the
arrow.
Removal Procedure
Procedure to Remove Heat Exchanger Temperature Thermistor
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Procedure
Cable tie
Thermistor
Insulation
Points
13