Clear Memory Mode - Subaru 2003 LEGACY Quick Reference Index

AIRBAG SYSTEM (DIAGNOSTICS)

9. Clear Memory Mode

A: OPERATION
1) Turn the ignition switch ON.
2) Connect the diagnosis terminal to diagnosis con-
nector terminal No. 2 in the driver's seat lower cov-
er area.
1 2
4
(1) Diagnosis connector
(2) DIAG. terminal
3) While the warning light flashes, connect another
diagnosis terminal to diagnosis connector terminal
No. 3.
4) Once the memory is erased, the warning light re-
turns to the normal flash rate (0.6 sec on). The fail-
ure to recover the normal flash rate indicates that
trouble parts still remain. Having repaired such
parts, erase the memory again and confirm that the
normal flash rate has returned.
5) When the memory has been cleared, disconnect
the diagnosis terminal from the diagnosis connec-
tor.
6) Wind tape around the diagnosis terminal and re-
turn it to its original position.
CLEAR MEMORY MODE
( 1 )
( 2 )
3
B82
5 6 7 8
AB-00290
AB-22