Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Forward SM-8800
Summary of Contents for Forward SM-8800
- Page 1 FULL Satellite Finder Meter SM-8800 HD DVB-S2/S +Spectrum Meter User manual...
-
Page 2: Table Of Contents
SM8800 Table of Contents Description....................... 3 Safety instructions................... 3 Safety of persons....................3 General information..................4 Appropriate Usage..................4 Delivery range ....................4 Device overview....................5 Start of operation.....................7 Battery......................7 Switch-on the Device..................7 Lithium-ions-battery..................8 Charging the battery..................8 Storing of the batteries .................. -
Page 3: Description
Signal strength and quality are displayed as numerical values and bar graphs. Another measurement value is the forward error correction (FEC) and the bit error rate (BER), In addition, the picture quality can be revised on the Modulation error rate(MER), high-resoluted 4.3-inch TFT LCD screen. -
Page 4: General Information
SM8800 security use a rope on sloping roofs. General information Attention! The devise should only be operated with the supplied AC adapter at the mains. Do not open the meter or the included AC adapter. There is danger of life through electric shock! Wrong usage of the ports can lead to the destruction of the measuring device. -
Page 5: Device Overview
SM8800 device meter a carrying bag an extern charger an power cable AV cable F connnector an user manual CD If the delivery should be incomplete, contact your specialist dealer Device overview LNB IN : Connect this port to the satellite atn cable RF IN: Not connect DC 14V: Power supply port AV OUT: Connect this port to TV’S CVBS via AV cable... - Page 6 SM8800 Figure: Front of the meter Description Digital satellite signal input LNB1-IN LNB2-IN LC-Display Display of the TV picture, the menu and the measured values Display of the energy state: POWER-LED Operation: red: the measuring devise is switched on. Off: the measuring devise is switched off. In charge: Green: The battery is charged Red: The battery is full charged...
-
Page 7: Start Of Operation
SM8800 Lights if 22K/13V/18V signals are received 22K/13V/18V-L Navigation through menus, Navigation-cross switching programs ▲, ▼ volume control ◄, ► OK button: confirmation of a selection Direct enter of numbers Numeric keys FIND menu: for a quick and easy alignment of FIND a satellite antenna Display the main menu... -
Page 8: Lithium-Ions-Battery
SM8800 Lithium-ions-battery Explosion danger! Never the two poles (+ and -) connect with each other! Attention! Storing or operating accumulator no more than 40° C. Not burning or damaging accumulator. Not taking accumulator to contact with water. Charging the battery The maximum battery charging time is approximately 12 hours. -
Page 9: System Setting
SM8800 System setting è Press the MENU button. è Select the point system setting. è Confirm your selection using the OK button. Figure 2: System setting language Setup Press the SYSTEM button to change the menu language. _ Select the point Language setup. _ Choose your desired language using the ◄- or ►- button. -
Page 10: Factory Default
SM8800 INFO Factory Default Press the SYSTEM button to change the menu language. _ Select the point Factory Default. _ Press OK to make the factory setting Factory reset Attention! All programs and settings, configured by you, will be reset to delivery status. -
Page 11: Satellite Finding
SM8800 Satellite finding In this menu you have the option to search for single channels or using the display for lining a satellite dish up. ð Press the FIND button to display the Satellite Finding menu. Figure 4: Satellite Finding Finding channels manual ð... -
Page 12: Lining Satellite Aerial Up
SM8800 Lining satellite aerial up Press the FIND button to display the menu satellite finding. -> ð Choose a satellite. ð Turn the receiving dish as long as the LOCK- LED lights, or the joists of the signal level and signal quality are green. Once a signal is found, the bar graph shows the signal strength and quality. -
Page 13: Dish Setup
SM8800 _ Select the point INSTALLATION and press the OK button Figure 5: Satellite setup _ Select the point Dish Setup and press the OK button. Figure 9: Dish set-up settings _ Press the ▲- or ▼- button to move to the desired item Press the ◄- or ►- button to modify the value of the selected item. -
Page 14: Satellite Setup
SM8800 DiSEqC 1.2: To enter the DisEqc1.2 Menu _SCAN: you can scan the channels at this menu by press SCAN key Finder:To enter the finder menu ANGLE:To enter the Angle menu _Press F2 to enter the DiSEqC1.2 menu Select Satellite:Press the ◄- or ►button to choose the Satellite name Edit/Select ref Transponder:Press ◄- or ►button to choose the TP Motor Position:Press ◄- or ►button to choose the Motor positon at the off/1-64 Movement style:Press ◄- or ►button to choose he movement style at the... -
Page 15: Usb
SM8800 _Name: Satellite name _Orb.pos[Deg]:Satellite Degree _West/East:控制天线转到方向 West or East _F1: press F1 to enter the Dish setup menu _F2: Add the new satellite _F3:Remove this satellite _Finder: To enter the Finder menu _ANGLE: Calculation the satellite Degree _Scan: Scan this satellite program _ Press the Channel Scan button to enter the channel scan menu. -
Page 16: File Viewer
SM8800 Figure 11: USB _Press the File viewer to play usb file _ Press the Updating- button or use the updating the sw _ Press the Backup Data to backup data 16 |ENG SAT-Meter... -
Page 17: Updating
SM8800 Figure 12: SW updating Figure 13: Backup Data Angle calculation _ Press the ANGLE button to display the Calculation menu. _ Press the ◄- or ►- button or use the NUMERIC keys to change the configuration of the selected menu point. 17 |ENG SAT-Meter... -
Page 18: Spectrum
SM8800 Figure 11: Angle Calculation _ Press the ▲- or ▼- button to select the following points: · Longitude · Location · Latitude Satellite · Angle Hemisphere calculation _Satellite: Select the desired satellite _Longtitude: Input your local longtitude _Location: Input the direction _Latitude: Input your local latitude _Longitude:... -
Page 19: Av Setup
SM8800 è choosing SPTRUM Figure 13: Spectrum analyzer Adjustment è F1 Span FULL:Changes the sampling –frequency between 50MHz/100MHz/200MHz è F2 LNB setting:To enter the LNB setting menu è F3 POLVER:To display the Power lever è OK Search:To enter the program search AV Setup ■... -
Page 20: Disposal
SM8800 ◄- or ►button to choose the display format at 4:3/16:9 _Display format: Press ◄- or ►button to choose the Scaling method at _Scaling method: Press Pillar-Letterbox/Fullscreen(zoom)/Fullscreen(CCO)/Let TV scale ◄- or ►button to choose the HDMI signal at 1808i/720p/480/576i _HDMI signal : Press 480/576p ◄- or ►button to choose theSDTV standard at _SDTV standardt: Press... - Page 21 SM8800 household waste. Figure 16: WEEE-Symbol Used devices contain valuable materials that should be recycled. Electronic equipment is not household waste - in accordance with directive 2002/96/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of 27th January 2003 on used electrical and electronic equipment it must be disposed of properly.
-
Page 22: Technical Specifications
SM8800 Technical specifications LNB/Tuner input F-type connector IEC 169-24 Frequency range 950 MHz ~ 2150 MHz Input level -65 dBm bis -25 dBm LNB power supply 13/18 V, max. 400 mA LNB control signal 22 kHz DiSEqC control Version 1.0/1.2 Demodulator Front-end-modul QPSK/8PSK... -
Page 23: Warrenty
SM8800 USB2.0 USB 2.0 Enternet Rj45 Hdmi output CVBS 3RCA[Video,L-Autio,R-Audio] Power supply Supply voltage 14 V Li-oN battery 3000 mA Charger 90 – 240 V Supply voltage (charger) 175 - 250 V ~, 50/60 Hz Dimensions Length x width x height 218m m*131mm*40mmcm Gross-weight 0.75 Kg...
Need help?
Do you have a question about the SM-8800 and is the answer not in the manual?
Questions and answers