Ketra N4 Installation Manual page 11

STEP 2
CONNECT THE HUB TO THE LAN (LOCAL AREA NETWORK)
There are two methods of doing this, shown below. Choose the one that best fits the needs of the installation. Once a
connection is detected, the N4s Ethernet indicator,
OPTION 1: DIRECT CONNECTION TO MODEM OR ROUTER.
N4
Fig. 6
• Use a CAT5 or equivalent Ethernet cable
• Cable can be no more than 100 m (328 ft)
N4 INSTALLATION GUIDE
I N S TA LL ATI O N
, will come on white.
Use either RJ45 port
CAT5 or equivalent
Ethernet cable
Modem /
Router
770-000027-02 r14 PAGE 11