❼
❾
❹
❺
❻
❽
– 4 –
3) Fix the sewing machine in the four places of the ma-
chine table with countersunk screws ❹ , washers ❺
and nuts ❻ supplied with the sewing machine.
4) Securely attach head support rod ❼ to the table
until it goes no further.
5) Mount spacers ❽ supplied with the machine head
on the frame.
6) Install bracket on CP panel ❾ with screws
supplied with the panel.
7) Install bracket on spacer ❽ with screws sup-
plied with the machine head and washers sup-
plied with the panel.
Do not use the screws supplied the panel
instead of screws supplied with the ma-
chine head.
* Accessory screw supplied with the machine head :
Thread diameter M5; Length 8 mm