Table of Contents
Advertisement
Frame (Longer side)
Cup washer (Terminal cup)
(Stainless steel or *brass)
Flat washer (Stainless steel)
Spring washer (Stainless steel)
Bolt (Stainless steel)
#8, #10, M5
Frame (Longer side)
Grounding hole
(0.205"
(5.2mm))
Grounding
Lug
Bolt (Stainless steel)
#8, #10, M5
Length
(not less than 0.63''(16 mm)
not more than 0.78''(20 mm))
Glass
Backsheet
Nut (Stainless steel)
Flat washer (Stainless steel)
Star washer (Stainless steel)
Grounding hole
0.205'' diameter
(5.2 mm))
*Flat washer (Stainless steel)
Ground wire (#12AWG)
(wound around the bolt)
Length
(not less than 0.63''(16 mm)
not more than 0.78''(20 mm))
Glass
Backsheet
diameter
Nut (Stainless steel)
Star washer (Stainless steel)
Flat washer (Stainless steel)
Thickness:
not less than 0.037" (0.94
mm)
Diameter:
not less than 0.75"
(19.05 mm)
Copper wire
Set screw (Stainless screw)
9
Figure 3.2 (Method 1)
Grounding method
using bolt and nut
Note:
Use
the
ground
illustrated in Figure 3.1.
*If using a brass cup washer, a
flat washer must be inserted
between the cup washer and
module
frame,
and
washer diameter must be greater
than the cup washer diameter.
Figure 3.3
Grounding method
Using bolt and nut
Note:
Use
the
ground
illustrated in Figure 3.1.
Select a grounding the following
lug.
ILSCO GBL-4DBT,
Burndy CL501TN
holes
the
flat
holes
Advertisement
Table of Contents
