DAQ DAQCard-1200 User Manual page 90

Glossary
L
LED
LSB
M
MAX
MB
MSB
N
NC
NI
NI-DAQ
NRSE
O
OBF
OUT
DAQCard-1200 User Manual
light-emitting diode
least significant bit
Measurement and Automation Explorer—National Instruments software
that allows you to interface with and configure NI devices
megabytes of memory
most significant bit
not connected (signal)
National Instruments
National Instruments driver software for DAQ hardware
nonreferenced single-ended mode—all measurements are made with
respect to a common (NRSE) measurement system reference, but the
voltage at this reference can vary with respect to the measurement system
ground
Output Buffer Full—a low singal on this handshaking line indicates that
data has been written from the specified port
output signal
G-6 ni.com