Table of Contents
Advertisement
Common Questions
Installing and Configuring the DAQCard-1200
Operating the DAQCard-1200
© National Instruments Corporation
This appendix contains a list of common questions and answers relating to
the operation of the DAQCard-1200. The questions are grouped according
to the type of information requested.
Which NI documentation should I read first to get started using DAQ
software?
Refer to the
Configuring the DAQCard-1200
Installing and Configuring the
What version of NI-DAQ must I have to program the DAQCard-1200?
The DAQCard-1200 is supported by NI-DAQ for Windows versions 6.9.x
and earlier. You may also the DAQCard-1200 with NI-DAQ for Mac OS
version 6.6.x or version 4.9.4 or earlier.
What is the best way to test the DAQCard without having to program
the DAQCard?
If you are using Windows, MAX has a Test Panel option that is available by
clicking Devices and Interfaces and then clicking the device. The Test
Panels are excellent tools for performing simple functional tests of the
DAQCard, such as analog input and output, digital I/O, and counter/timer
tests. If you are using Mac OS, the NI-DAQ Configuration Utility provides
the same functionality.
When using the DAQCard in differential analog input mode, I have
connected a differential input signal, but the readings are random and
drift rapidly. What's wrong?
Check the ground-reference connections. The signal may be referenced to
a level that is considered floating with reference to the DAQCard ground
reference. Even if you are in differential mode, the signal must still be
DAQCard-1200, for this information.
C-1
C
section in Chapter 2,
DAQCard-1200 User Manual
Advertisement
Table of Contents
