Fagor CNC 8055 Manual page 73

Functionality at the PC via WinDNC
In order to be able to read and write onto these memory cards from
a PC so the CNC understands it, meet the following requirements:
• WinDNC version V4.0 or newer.
• Operative system: Windows
• PCMCIA slot.
The list of the possible WinDNC connections will show the CARDA
option. When connecting to the CARDA, it checks the slot of the
PCMCIA and it acts as follows:
• There is no memory card inserted.
The interface warns about it and the connection fails.
• There is a memkey card inserted.
The interface warns about it and the connection fails.
• The inserted memory card is correct.
Connection is established.
• There is a memory card, but it is not formatted.
It offers the user the chance to format it. When accepting to
format it, everything is fine and the connection is established.
If the formatting is canceled or a problem occurs while
formatting, the interface warns about it and the connection fails.
• There is some other problem (maybe hardware related or that has
to do with the driver configuration).
The interface shows an error message and the connection fails.
Once the connection has been established, it is possible to access the
"Files" menu. The options to see tables, symbols and screens are
d is a bled . O n ly p ar t-p r o gra ms a n d P L C p ro g ram s may b e
manipulated. These may be transmitted from and to the memory card.
On the contrary, tables, symbols, screens and parameters cannot be
manipulated.
When copying programs with the memory card, it maintains the OEM
permissions and the "hidden" file attribute.
Considerations
Before extracting the memory card from the PC, finish the WinDNC
connection.
®
2000 or XP.
N F
EW EATURES
(S M: 9.0 )
OFT X
Page 13 of 106