Page 4
- Align the mixer horizontally, vertically and parallel to the wall, see fig. [3] (place a spirit level on the cams or face of the mounting template). Application - Install concealed thermostat mixer module in wall and Thermostat mixers are designed for hot water supplies from connect pipelines, see fig.
Page 5
Final installation Temperature limit stop If the temperature limit stop should be 43 °C, use handel ref. 1. Remove screws (C) and mounting template (D), see fig. [7]. No. 47 812 (see fold-out page I). 2. Install holder (J) and fit sleeve (K) and (L), see fig. [8]. 3.