Using The Countertop Light; Replacing The Bulb; Display Brightness; Troubleshooting Tips - GE GES050 User Manual

Using the Countertop Light

The countertop light switch is located on the side
EN
of the unit, and has three settings: HI, LO, and
OFF.
• For dimmer light, move the light switch to the
LO position.
• For more illumination, switch to HI.
• To turn the light off, place Light switch to OFF.

Replacing the Bulb

1. Unplug the unit cord from the AC power
outlet.
2. Unlatch the cover to open it.
3. Unscrew and remove the bulb.
4. Install the replacement bulb.
5. Swing the cover up and snap it in place.
6. Plug the cord into the AC outlet, and reset the
clock.
DISC PLAYER
OFF RADIO CD
er

Display Brightness

In standby mode, press VOL - or + to select
display brightness level (bright (normal) / dim /
dimmer)
15
Caution: Caution: Caution: Caution: Caution:
Use only appliance-type bulb with a
maximum of 40-watt or equivalent for
replacement. To prevent hazard, do not
operate light without the cover.

Troubleshooting Tips

Remote Control

• Is the unit plugged into a working AC outlet?
Try plugging it into one that you know will
work.
• Is the unit on?
Press RADIO ON / BAND or PLAY PAUSE
to turn the unit on.
• Have you selected the correct function when
pressing on the buttons?
For example, if the unit is in CD mode and
you try tuning to a particular radio frequency,
the remote control is not going to look like
it's working. In such cases, press RADIO ON /
BAND to select radio or PLAY PAUSE to
select CD function first, then press on the
buttons.
• Are the batteries weak?
Try replacing old batteries with some fresh
ones.
• Are you pointing the remote control directly
at the unit while pressing the buttons?
You should be, because the remote control
sensor at the unit is right at the center of the
display.
• Are you too far from the unit when using the
remote control?
The remote control sensor can only sense
signals (from the remote control) within a
limited distance. So move closer towards the
unit.
• Are there any obstacles between the remote
control and the unit?
If there are, move all objects standing in the
way between the remote control and the
unit.
16
EN