Settings; Setting The Time; Setting The Countdown Timer; Radio - GE GES050 User Manual

Thomson inc. user guide compact disc ges050
Table of Contents

Advertisement

Display
EN
Playback modes:
Bass
Shuffle, repeat track,
indicator
repeat disc
In CD mode, shows
Wx
track number;
TV
In tuner mode,
shows memory
location.
Weather Band

Radio

TV Band
band

Settings

Setting the Time

The time display has a 12-hour format with AM
and PM indicator. To set the time:
1. Press
(inside battery compartment) to enter
time setting mode.
The red Clock
icon will appear on the
display.
2. To set clock time, use the
/
buttons to
select the correct time.
Press and hold to fast reverse or fast forward
clock time.
3. Press
again to save clock time. The red
Clock
icon will turn off.
Tips:
Tips:
Tips:
Tips:
Tips:
In standby mode, press
/
show the seconds counter.
11
AM/PM time
Daylight Saving
indicator
Time indicator
Volume indicator
Volume
In clock setting mode
indicator
Countdown timer
indicator
Time/ countdown time /
Radio frequency
radio frequency
unit

Setting the Countdown Timer

1. Press TIMER ON/OFF to enter timer setting
mode.
The red TIMER icon will flash on the display.
2. To select countdown time, use the
/
buttons to select the correct time.
Press and hold to fast reverse or fast forward
countdown time.
3. Press TIMER ON/OFF again to activate the
timer. The unit will beep twice to indicate
countdown has started. Remaining time
shows on the display.
The red TIMER icon will remain lit during
countdown.
4. Press TIMER ON/OFF to turn timer off at any
time or after it has sounded.
to
Note:
Note:
Note:
Note:
Note:
The radio or CD player is muted when alarm
turns on.
Radio

Built-In AFC

The Built-In Automatic Frequency Control (AFC)
works only on FM. It helps to reduce drift on FM
reception and to keep the radio locked in on the
FM station to which it is tuned.
Antennas
AM Antenna - A built-in ferrite rod antenna
eliminates the need for an outside antenna for
AM reception. Rotating the unit slightly may
improve reception of distant AM stations.
FM Antenna - The power cord acts as your FM
antenna. The power cord picks up moderate to
strong stations and eliminates the need for an
external antenna in most strong signal areas. Be
sure the power cord is stretched out to its full
length. Do not coil or bunch the cord together.
Changing position of the power cord may
improve reception.
Turning on the Radio
Press RADIO ON / BAND to turn on the radio.
Turning off the unit
Press OFF to turn off the radio.
Adjusting Volume
Press VOL - to decrease volume level.
Press VOL + to increase volume level.
Selecting Radio / TV Band
Press RADIO ON / BAND to select between FM,
AM and TV band.
Tuning to a Station/Channel
Press
to tune down radio frequency or
select the previous TV channel.
Press
to tune up radio frequency or select
the next TV channel.
Note:
Note:
Note:
Note:
Note:
The display will return to the clock
time after displaying the station fequency or
channel number for a few seconds. To view
the current station frequency or channel
number, press
or
.
Automatic Station/Channel Search
Press and hold
or
for more than 1
second and release to start automatic station/
channel search in the direction selected.
Search will stop once a station is found.
Tips:
Tips:
Tips:
Tips:
Tips:
Press
or
to quit automatic station/
channel search.
12
EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents