Table of Contents
Advertisement
Recording a Program
Recording Audio
You can record audio only from another audio source connected to the AUDIO1 IN (L and R) jacks on the
back of the VCR.
To Record Audio Only
1. Press the INPUT button or 0,0 on the remote to hear the
2. Use SPEED on the remote to select the recording speed.
3. Start playing the audio source. Then, press RECORD on
4. Press STOP•EJECT on the VCR or STOP on the remote
To Play Back Audio Only
Connect the AUDIO OUT of the VCR to the appropriate input
on your amplifier or receiver. Do not use the phono input.
Refer to your amplifier or receiver userÕs guide for
information.
Using the Recording Features
Recording Pause
To prevent recording short passages of unwanted material, use PAUSE on the remote or
PLAY•PAUSE on the VCR during recording to stop and start recording.
P
D
and
appear in the VCRÕs display panel.
The VCR automatically switches from pause to stop after a few minutes.
Pro-Tect Plus™ (Child Lock) Feature
This feature is useful to tamper proof your timer recordings from unwanted changes
and/or protect the VCR from misoperation by other users in the household.
To Lock the VCR
Press and hold the POWER button on the remote for
approximately six seconds to turn on the Pro-Tect Plusª
feature.
The
To Unlock the VCR
Press and hold POWER button on the remote for
approximately six seconds to unlock the VCR. The VCR
turns on.
28
(Refer to hookup on page 7.)
source attached to the AUDIO jacks. VIDEO appears on
the TV screen.
The VCR records audio from the audio equipment
connected to the AUDIO1 (L and R) IN jacks.
The tape speed indicator appears on the TV screen.
the VCR or REC on the remote to begin recording.
D
6
and
appear in the VCRÕs display panel.
when you are finished.
D
and
appear in the VCRÕs display panel.
TIMER
Advertisement
Table of Contents
