Connecting A Stereo Receiver Or Amplifier; (Dvd Player Only); Connecting Game Systems/Video; Equipment (Monitor Only) - RCA DRC69702 User Manual

Connections
C. Connecting a Stereo Receiver or Amplifier (for the DVD Player Only)
The DVD player can play two channels Dolby Digital.
Listening on External Audio
Equipment
1. Connect the DVD player to the left/right
Audio In jacks on the other equipment
using a standard Audio cable (not
included).
2. Turn on your audio equipment and
follow the instructions provided with it
to select the AUDIO IN function.
Note:
• Make sure to use the correct Audio cable. Connecting the plugs incorrectly may cause a weak signal.
• If you have a stereo VCR, make sure you set it to stereo mode.
• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the
resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.
D. Connecting Game Systems/Video Equipment (for the Monitor Only)
You can connect game systems or other video equipment for playback using the monitor.
Watching video equipment
1. Connect the other equipment to the monitor using a standard AV Cable (not included).
2. Turn on the monitor.
3. Turn on the video equipment and follow the instructions provided with it to playback.
Note:
• Make sure to use the correct Audio/Video cable. Connecting the plugs incorrectly may cause a weak
signal.
• If you have a mono VCR, the volume level from the speakers will be low.
RCA DRC69702 IB.indd 7
Game System /
Video Equipment
DVD player
right side
Audio cable
(not included)
To Audio OUT jacks
left side
AV cable
(not included)
To A/V IN jacks
Stereo Receiver /
Amplifier
Monitor -
right side
11/25/2008 2:28:56 PM
7