Table of Contents
Related Manuals for Westinghouse HT382E55
Summary of Contents for Westinghouse HT382E55
- Page 1 ELECTRIC WATER HEATER HT382E55 Note: Before operating or installing this electric water heater read this manual and follow all safety rules and operating instructions. 220v 6.8 Kw 240v 30~55°C L/Min VOLTAGE TEMPERATURE POWER MINIMUN FREQUENCY WATER FLOW...
-
Page 2: Table Of Contents
Please read and follow the installation and operation instructions carefully, to ensure the long life and reliable operation of this appliance. CONTENTS Important Safety Instructions ------------------------------------------------------------------------ page 3 Product Features -------------------------------------------------------------------------------------- page 4 Electrical Diagram ------------------------------------------------------------------------------------- page 4 Technical Data ------------------------------------------------------------------------------------------ page 5 Product Inner Structure ------------------------------------------------------------------------------- page 5 Installation Guideline ---------------------------------------------------------------------------------- page 6 Installation Method ------------------------------------------------------------------------------------ page 6... -
Page 3: Important Safety Instructions
Attention! This is not a do-it-yourself project. Failure to have this appliance installed by a licensed plumber and electrician will void all warranties. Under no circumstances should you attempt to install, repair or disassemble the electric instantaneous water heater without first shutting o all power to the unit directly at the circuit breaker box. -
Page 4: Product Features
Product Features The electric instantaneous water heaters are incorporated with China national patent heating technology with multi-safety devices. Besides, the unit has the following features. 1. The appliance provides instant hot water. No pre-heating. No stand-by heating loss. Energy-saving. 2. Micro-computer control, Adopting patent heating technology. Water is completely separated from electricity by multi-layers of composite nano insulation material. -
Page 5: Technical Data
Technical Data Model HT382E55 Phase Rated Voltage 220V-240V Rated Power 6.8kw Rated Current 29.6A Rated Pressure 0.02-0.6Mpa Eddiciency At=25ºC 4.3 L/min Safety class IP25 Connecting wires section 3x4mm2 Temp. setting arrange 30ºC-55ºC Overheat protection 67ºC Thermal cut-o 90ºC Pipe section G1/2"... -
Page 6: Installation Guideline
Installation Guideline The installation must be in compliance with the National Electrical Code, your local electrical and plumbing codes. 1. Make sure the appliance is intact, and the fittings are complete. 2. Do not install the unit in a room where there is a chance of freezing. 3. - Page 7 Installation Method Fig 3 Hold the back bracket hanger in position against the wall and mark the three mounting holes. Drill three holes of 6.00mm diameter, the distance between every two holes is 100mm. (Put plastic anchor in the hole, fix the bracket on the wall. and secure the hanger using the screws supplied or an appropriate alternative method).
- Page 8 Installation Method Fig 6 Connect the cable to the terminal blocks, please notice the guidance logo below the terminal blocks. Fig 7 Fix the front cover on appliance, before that, please plug in the screen row line plug. Then nail the screws to fix the front cover.
- Page 9 Installation Method Fig 8 Connect the water pipe to the water inlet and water outlet connections, please remember to fix the rubber seal ring. • If the appliance is equipped with a cable, it is no need to uninstall the case during the installation.
-
Page 10: Operation Instructions
Operation Instructions 1. Turn on the circuit breaker to bring electrical power to the unit. 2. After the unit is supplied with power, beeping can be heard and LED light is on, the appliance enter into standby mode. 3, Turn on the water, the appliance starts to work. The unite must be operate after the breaker is turned on. -
Page 11: Packing List
Normal Maintenance Note: Do not attempt to repair this water heater yourself, call a service person for assistance. Always turn o the power supply before servicing your unit It is not required any regular maintenance. However, to ensure consistent water flow, the following maintenance is recommended.
Need help?
Do you have a question about the HT382E55 and is the answer not in the manual?
Questions and answers
unit does not turn on
The Westinghouse HT382E55 unit may not turn on due to the following reasons:
1. Power not connected – Connect power to the unit.
2. LED damaged – Replace the LED.
This answer is automatically generated