Samsung ACH1800E Technical Manual page 27

3
INSTALLATION
Operation of the Remote Controller
3-1-4. Name and function of each part for the wire remote controller
Duct Type
Communication error indicator
On Timer setting
Off Timer setting
Temperature adjustment buttons
On Timer button
Off Timer button
BUTTON NAME
On/OFF & Timer
Set/Cancel
Temperature adjustment
(..., †)
On Timer
Off Timer
Test
Mode Selection
Filter Reset
Fan Speed
26 | SAMSUNG
Removing frost indicator
Test indicator
Test button
• Start and stop of operation.
- To toggle the operation On and Off.
• When making the reservation.
- The reservation time can be set or canceled when pushing the Timer Set/ Cancel button
after adjusting the reservation time with On Timer or Off Timer.
...
• To increase ( ) or decrease (
• One cycle or continuous operation is available.
• To increase the On reservation time.
• One cycle or continuous operation is available.
• To increase the Off reservation time.
• One cycle or continuous operation is available.
• Pressing the key for more than 3 seconds with the SET off starts the initial operation
(forced cooling operation for 3 minutes).
• To rotate in the order of AUTO
• When the filter sign display starts to show the replacement time of filter of indoor unit,
pressing the key after cleaning the filter resets the filter sign.
• The wind mode to rotate in the order of wind select button, Breeze
→
Wind auto Breeze.
(Cont.)
Operating mode
Centralized controller indicator
(In case of installing the Centralized controller)
Mode selection button
FUNCTION
†
) the desired temperature.
→ →
Cooling Dehumidifying
Temperature setting
Fan speed
Air flow direction
Filter Sign indicator
On/Off & Timer
Set/Cancel button
On/Off indicator
Fan speed adjustment button
Filter Reset button
→ →
Blowing heating.
→ Weak → Strong →