Procedures; Test Warning - LEAP Electronics PCFACE–PCIE1-2.0 User Manual

DOS TESTING PROCEDURES
START
Request all PCI logging
parameters
command PC2A /R
Execute testing procedures
Turn off PCFACE power
Change testing board
Turn on PCFACE power
Set parameters of new inserted
interface card
command: PC2A /W
or : PC2A /W /ID=xxxx
WINDOWS TEST WARNING：
1. Must disable/remove the device when changing the DUT.
2. After changing the DUT, select"enable"if"disable"was selected; the system will automatically
search if"remove"was selected.
3. When two IDs exist on the testing card, disable the subordinate ID prior to the primary ID; when
enabling, do the other way around. Example: disable the product ID prior to the Bridge ID; enable
the Bridge ID prior to the product ID.
LEAP PCFACE-PCIE1-2.0 USER MANUAL
Program Testing Demo ( batch files )
PC2A /R
parameters
:LOOP
CARD_TEST
user's testing programs or
CALL CARD_TEST.BAT
(testing batch files)
PAUSE ..............................
wait for users to press any key.
PC2A /W
load PCI parameters
GOTO LOOP .....................
loop, test the next card
7
save PCI logging
...........................