Table of Contents
Advertisement
UN-INSTALL, REMOVE AND MAINTENANCE
1. When removing PCFACE-PCIE1 primary card, turning off the PC power is
requested preventing from unexpected damages.
Note: Unexpected damages failure may occur if the DUT is removed without
turning off PCFACE-PCIE1 power which is exclusive of our guarantee under the
artificial operation.
2. Remove the DUT inserted on PCFACE-PCIE1 Slot before moving and avoid the
Slot being damaged.
3. The slot of PCFACE-PCIE16, which is an expendable products and might be
wore out, should be replaced after using a period of time to remain a stable
system.
4. Extension protection slot and converting board are expendable material
which can be replaced, purchased through Leap's distributors or related sales
representative and service department.
LEAP PCFACE-PCIE1-2.0 USER MANUAL
8
Advertisement
Table of Contents
