Installation And Operation - LEAP Electronics PCFACE–PCIE1-2.0 User Manual

PCFACE-PCIE1-2.0 FLOW CHART OF

INSTALLATION AND OPERATION

START
Turn off PC power
Install PCIE1 protector card
Lock steadily PCIE1 interface card
Plug in external DUT
Turn on PC power
Install the
DUT driver hardware
Finish executing the testing or
experiment of DUT
Disable DUT hardware
Turn off power of PCIE1
interface card
Remove the DUT
Ending
LEAP PCFACE-PCIE1-2.0 USER MANUAL
Change different ID card testing loop
Change the same ID card testing loop
Setup
Turn on PCIE1 power
5
Change DUT
Turn off PC power