MISTAWAY SYSTEM PARTS 1. Drum All Weather Cover (2) 2. All Weather Cover 3. Lid Ring Drum (1) 4. Drum Lid 5. Motor/Pump Unit with Pump Assembly Lid Ring (3) 6. Pressure Gauge 7. Enclosure box (7A)Timer Drum Lid (4)
MISTAWAY SYSTEM INITIAL INSPECTION Check drum for above parts. Depending on how drum was shipped, some parts may be located inside the drum. BEFORE DRUM IS OPENED MAKE SURE POWER CORD IS UNPLUGGED To open, remove the Lid Ring (3). Carefully remove Drum Lid (4) making sure it does not fall inside the Drum.
Pressure Gauge (6) reads 170-180 psi. 170-180 will not be reached until the MistAway System purges all air out of the tubing line and nozzles. With one person operating the Needle Valve, another person needs to check for leaks at all connections.
The MistAway System comes with a battery backup. If power is lost to the system for any reason, the timer will keep accurate time and not need to be reset. Remember to adjust your timer for Daylight Savings Time.
Enclosure Box to make sure they are set for desired times. Check Duration Knob (7B) to make sure sprays are set for desired duration. Flip the Pump Switch (7C) to the ““HAND”” position. Run the MistAway System until all the environmentally safe Windshield Washer Fluid is purged from the system. Flip the Pump Switch back to the “AUTO”...
Page 8
Mosquito MistAway System™ is not maintained by an authorized Mosquito MistAway Dealer and any problems arise do to the customer utilizing an insecticide not expressly recommended for the Mosquito MistAway System™ or using a company other than an authorized dealer to service the unit, the warranty will be voided.
Page 9
• Lost items. • Loss of operating time to Buyer while the equipment is out of operation. Equipment items or components not manufactured by Town & Country Mosquito Systems are only warranted insofar as warranted by the manufacturer of such parts.
Need help?
Do you have a question about the Mosquito and is the answer not in the manual?
Questions and answers