Table of Contents
Advertisement
PCH SATA/sSATA RAID mode setting
Take SATA as an example to introduce how to set the SATA/sSATA controller to RAID mode,
the sSATA setting method is similar with SATA's, and there is no explanation here.
1.
Set the SATA Mode Option to [RAID], press F10 to save the setting, and the system reboots.
Notes:
When the SATA Mode Option is set to RAID, you can choose whether to enable the Load EFI
Driver for RAID option. When the Boot Type is UEFI mode, the setting is Enabled. However,
when the Boot Type is Legacy mode, you need to set Load EFI Driver for RAID to Disabled.
When the Boot Type is UEFI mode and the Load EFI Driver for RAID is set to Enabled, the
system will load Intel RSTe SATA Controller to manage the SATA RAID after pressing F10 and
system reboot. When the logo appears during system startup, press ESC to enter the Front
Page interface, enter the Device Management configuration interface, and select Intel RSTe
SATA Controller to configure RAID.
When the Boot Type is Legacy mode and the Load EFI Driver for RAID is set to Disabled, the
system will load Legacy Option ROM to manage the SATA RAID after pressing F10 and system
reboot. During system startup, the screen will prompt: Press <CTRL-I> to enter Configuration
Utility...then press <Ctrl> and <I> simultaneously to enter the SATA RAID configuration
interface for RAID configuration.
2.
Take SATA RAID configuration in Legacy Mode as an example to introduce the SATA
RAID configuration. During system startup, the screen will prompt: Press <CTRL-I> to
BIOS Setup
57
Hide quick links:
Advertisement
Table of Contents
