Install The Pcie Riser Cage; Remove The Air Baffle - Inspur NF5288M5 User Manual

6. Hold the PCIE Riser cage and remove it vertically.

4.7 Install the PCIE Riser Cage

1. Power down the server.
2. Extend the server from the rack.
3. Remove the front access panel.
4. Install the PCIE Riser cage.
5. If the PCIE Riser card is equipped with cables, connect the cables.
6. Install the front access panel.
7. Install the server into the rack.
8. Power up the server.

4.8 Remove the Air Baffle

CAUTION: For proper cooling, do not operate the server without the access panel, air baffle,
or fan installed. If the server supports hot-plug components, minimize the amount of time
the access panel is open.
1. Power down the server.
2. Extend or remove the server from the rack.
Operations
17