Table of Contents
Advertisement
"Cruise Control" button
This button automatically determines the cruise speed of the vehicle (see §4.4.10).
Engine stop switch
It is used to switch off the engine in an emergency. The ignition circuit is disabled, preventing the engine
from being restarted. To be able to restart the engine, return the switch to its original position.
NOTE: Under normal conditions, do not use this switch to shut off the engine.
Engine start button
It is used to start the engine and, when the engine is running, to select the different functions of the dis-
play installed on the instrument panel.
CAUTION
To avoid damaging the electrical equipment, be sure not to hold down the button for longer
than 5 consecutive seconds.
If, after some attempts, the engine does not start, refer to the chapter "TROUBLESHOOT-
ING" later in this manual.
CONTROLS AND INSTRUMENTS
- 21 -
3
3
Advertisement
Table of Contents
