Leveling The Appliance; Assembling The Anti-Rat Cover (Some Models Only) - LG WTG1032VF Owner's Manual

Leveling the Appliance

If the floor is uneven, turn the adjustable feet as
required (Do not insert pieces of wood etc.
under the feet). Make sure that all four feet are
stable and resting on the floor and then check
that the appliance is perfectly level.
Diagonal Check
• When pushing down the edges of the
appliance top plate diagonally, the appliance
should not move up and down at all (Check
both directions). If the appliance rocks when
pushing the machine top plate diagonally,
adjust the feet again.
NOTE
• Timber or suspended type flooring will
contribute to excessive vibration and
unbalance. Re enforcement or bracing of the
timber floor may need to be considered to
stop or reduce excessive noise and vibration.
• Do not install the washer on any elevated
surface, stand or plinth as it can become
unstable and fall causing serious injury and
damage.
• If the washing machine is installed on a
uneven, weak or tilted floor causing excessive
vibration, spin failure or "UE" error can occur.
It must be placed on a firm and level floor to
prevent spin failure.
Assembling the Anti-Rat
Cover (some models only)
Insert the Anti-Rat cover to the assembling hole
from the front or back of the washing machine.
Type 1
Type 2
EN
17