Time Delay - LG WTG1032VF Owner's Manual

Hide thumbs Also See for WTG1032VF:
Table of Contents

Advertisement

Time Delay

• You can set a time delay so that the washing
machine will start automatically and finish after
a specified time interval.
1
Press the Power button.
2
Select a washing programme.
3
Press the Time Delay button to set the
required Delay ending time.
4
Press the Start/Pause button.
NOTE
• The delay time is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
load and other factors.
• Reservation can be made up to 18 hours by
1-hour interval up to 3 - 12 hours and 2-hour
interval for 12 - 18 hours.The Time Delay
cannot be set for less than 3 hours.
• To cancel the Time Delay function, press Time
Delay button repeatedly until the reservation
is canceled or press the Power button to turn
off and on power.
• If door is opened during reservation,
Press the Start/Pause button to reservation.
Then close the door and press Start/Pause
button
Intensive Wash
Press the Intensive Wash to allow a higher
agitation intensity.
• It is set to medium intensity by default. It can
be set on all programmes except Delicates,
Quiet Wash and Tub Clean.
26
Soak
• Soak can be selected to wash heavily soiled
clothes by soaking in water for some time to
remove dirt and grime.
1
Press the Power button.
2
Select a washing programme.
3
Press the Soak Wash button to set time
required.
4
Press each of the Rinse or Spin button to
select the number of Rinses or the Spin
strength.
5
Press the Start/Pause button.
Hot Wash / Cold Wash
• Press the Hot Wash and Cold Wash buttons
to select hot water, cold water, or hot and cold
water (warm water).
• It can be changed during operation.
• If hot wash is selected, the washing will be
done with hot water and rinse will be done
with cold water.
• Hot and cold water selected together allows a
warm water temperature by mixing them
during the filling. It is normal for cold water to
enter the tub first.
• Delicates programme is cold water only. If hot
water is used, the laundry can be damaged.
• Both Hot Wash and Cold Wash are
automatically selected for the Extra Rinse
Programme and the Tub Clean Function.
EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wtg1030sfWtg1032wf

Table of Contents